HDPE TRB-115

Nkọwa dị mkpirikpi:

Marlex Brand

HDPE |Ihe nkiri

Emere na United States

Ọnụ ahịa:1000-1200 USD/MT

Port:Huangpu / Ningbo / Shanghai / Qingdao

MOQ:1 * 40 GP

CAS Mba:9002-88-4

Koodu HS:: 3901200099

Ụgwọ:TT / LC

Zitere anyị email Budata dị ka PDF

Nkọwa ngwaahịa

Nkọwa

• Ezi afụ kwụsie ike na ihe nkiri drawdown.
• Mmetụta dị elu na ike siri ike.
• Ike siri ike na ike tensile dị oke mma.
• Ike akwa akwa n'ụzọ ziri ezi.

Ngwa

• Akpa T-shirt
• Mepụta akpa
• Akpa ngwa ahịa
• Ụlọ ọrụ mmepụta ihe
• Mpempe ahịhịa ahịhịa

Nkọwapụta

FDA 21 CFR 177.1520 (c) 3.2a.Enwere ike iji resin na kọntaktị na ụdị nri ọ bụla dị ka akọwara na Tebụl 1, 21 CFR 176.170 (c) na ọnọdụ ojiji BH dịka akọwara na Tebụl 2, 21 CFR 176.170 (c).

Njirimara Resin aha	Bekee	SI	Usoro
Ndekọ agbaze, 190 Celsius C/2.16 n'arọ	-	0.06 g/10 nkeji	ASTM D1238
HLMI, 190 Celsius C/21.6 n'arọ	-	9.5g/10 nkeji	ASTM D1238
Njupụta	-	0.950 g/cm³	ASTM D1505

Ngwongwo ihe nkiri na-afụ ọnụ na 0.5 mil¹	Bekee	SI	Usoro
Dart	260 g/mil	100 N/mm	ASTM D1709
Elmendorf Tear MD	15 g/mil	6 N/mm	ASTM D1922
Elmendorf Tear TD	450 g/mil	174 N/mm	ASTM D1922
Ike tensile na Break MD	13,000 psi	90 MPa	ASTM D882
Ike tensile na Break TD	6,000 psi	41 MPa	ASTM D882
Elongation tensile na Break MD	260%	260%	ASTM D882
Mgbatị tensile na Break TD	570%	570%	ASTM D882
1 % Secant Modul MD	120,000 psi	827 MPa	ASTM D882
1 % Secant Modul TD	140,000 psi	965 MPa	ASTM D882

Ihe nkiri 0.5 mil (12.7 micron) emepụtara site na iji ihe na-ekpo ọkụ grooved-feed extruder na ọnụego 225 lb / h na elu stalk nke 7 x Die dayameta, 4: 1 Blow-Up
Ratio (BUR), dayameta anwụ anwụ inch 6 na oghere anwụ anwụ 0.040 inch.Ngwongwo aha aha a kọrọ na ebe a bụ nnọchite anya ngwaahịa dị n'okpuru
ọnọdụ nhazi ndị a, ọ bụ ezie na ihe nkiri ihe nkiri nwere ike ịdị iche iche dabere na ọnọdụ ihe nkiri a kapịrị ọnụ.Ya mere, data kwesịrị
agaghị eji maka nkọwapụta.

Nke gara aga: HDPE FI0750

Osote: LDPE FD0274